10 Top Boiler Maintenance Tips

We are fast approaching cooler weather and you might be thinking about turning your boiler on. Some maintenance carried out in early Autumn will not only save you money and but possibly even your life. Boilers which are not maintained can become faulty and faulty boilers can be fatal. Also, remember that a well maintained boiler will be much more efficient and save you money in your fuel bills.

1) Annual boiler service

Getting your boiler serviced annually will keep it running in tip top condition. A skilled Gas Safe engineer will be able to make adjustments to the running of the boiler to ensure that it is not only running safely but also efficiently. The engineer will check that the main components of the boiler are working and give accessible areas a clean. Getting your boiler serviced in September will ensure that your boiler is ready for heavier use in the Autumn and Winter months and it reduces the ratio of boiler repairs.

2) Bleed radiators

When you first turn on your boiler, allow it to run for a bit. You will probably notice that some of the radiators do not heat up straight away. This is often because there is air in the radiator. You can tell if it is air because the radiator will be hot at the bottom and cold at the top.

To resolve this, follow these steps:

  • Get an old cloth and a radiator key.
  • Protect carpet with plastic just in case it leaks
  • Place the key in the valve and gently turn the key anti clockwise for a quarter of a turn holding the cloth underneath the key to catch any water that escapes.
  • You will hear a hissing noise as the air comes out of the radiator.
  • After awhile, the hissing will stop and water should start to come out of the radiator.
  • Catch any excess water in the cloth.
  • Turn the radiator key in the opposite direction to close the valve.
  • Check the radiator that should now be hot all the way to the top.

After you have bled the radiator, you should check the pressure gauge on the boiler as it is likely that the pressure will drop and you may need to re-fill your boiler see point 5 below for heating boiler repair.

3) Common radiator problems

a) Painted over valve – If the radiator has been painted, sometimes the valve is painted over. This means that it is not easy to free the valve try applying some pressure and WD40 to free it. If not, call us and we will send someone over to you to fix the problem.

b) Radiator is hot at top but not at the bottom – This will be because there is sludge in your radiator, you will need to get the system power flushed. Click here for more information on power flushing your central heating system.

c) Radiator not heating up at all – Check to see that the valve at the bottom of the radiator is open. It will turn clockwise. If it is open and the radiator is still not heating up, this could mean a problem with the valve. If you need to replace the valve, we would always recommend that you opt for a thermostatic radiator valve as it gives you the ability to adjust the heat setting of the radiator according to your needs.

4) Balancing the radiators

This is quite a tricky but worthwhile exercise. Once you have bled all the radiators, you might notice that some are warmer than others. If you gently adjust the radiators so that the really hot ones are less hot, then the cooler ones should warm up. In big houses this it quite difficult and you may require expert help. My Plumber does carry out a Boiler Service Plus which includes bleeding radiators and balancing the system.

5) Checking the boiler pressure

Once the boiler is working, check the pressure gauge to make sure that it is running to Manufacturer’s recommended pressure levels. If the pressure is low, then you can top it up. This is how you re-fill a Worcester Bosch boiler.

Please remember to do this carefully as it is very easy to damage a part of the boiler called the Pressure Release Valve. If this part is damaged, then you will need to call a Gas Safe engineer to fix the problem.

6) Check for dripping from the boiler overflow pipe

If there is water dripping from the overflow pipe (located outside your property), it could mean that there is a problem with the boiler. Commonly, the Pressure Release Valve has become faulty. This could be as a result of overfilling the boiler or simply, over time, it has become faulty. You will need to call an engineer to resolve this problem.

boiler repairs

7) Check ventilation

Boilers need to have space around them to be properly ventilated. Make sure that wherever the boiler is housed is clear of clutter. All those shoes, bags and coats should be moved out of the way to let your boiler breathe.

If the boiler is housed in a box, ensure that the boiler is accessible with an access panel so that it can be maintained properly. There are strict ventilation requirements and these can be found in your manufacturer’s instructions.

8) Check flue is accessible

Recently the regulations changed and now it is law to ensure that the flue can be seen so that any joints can be checked. This means that for any flues that disappear into the ceiling or a void, access panels must be installed.

This is for your safety because if a joint is leaking with carbon monoxide, it might not be spotted. If you have any doubts, it is wise to call us or another Gas Safe engineer and we will fit some access panels for you.

9) Look for a blue flame

If the flame of your boiler is yellow or orange and not blue, call a Gas Safe engineer straight away and get it checked. A yellow or orange flame on a boiler can mean that the boiler is faulty.

10) Do not try to do any boiler repairs yourself

If there is a problem with your boiler, do not open it and try to fix it yourself. Always ensure that whoever does work on your boiler is Gas Safe Registered.

Ask the engineer to show you his Gas Safe Card and check that the dates are correct for the year. Call the Gas Safe and check the number is valid.

Advertisements

How to Prepare Your HVAC System

It’s already September! Back-to-school has come and passed, and before you know it winter will be here. The heating and cooling effectiveness of your HVAC system is important during all seasons, but winter is one of the worst times to have to deal with problems with your home’s heating system. During the summer, a faulty HVAC system can cause great discomfort in the sweltering heat, but you can’t take the edge off a freezing winter with tower fans and ice water and also with the professional suggestion of b&b heating and cooling.

To ensure that your home is nice and cosy for the season, it’s best to begin preparing for winter as soon as possible. Here is some advice about how to prepare your HVAC system for the cold months ahead:

The Impact Of Winter

The harsh weather conditions during Maryland winters can cause big problems for your family if your HVAC system isn’t operating at peak efficiency. Snowfall and cold winds threaten the longevity of your system so it’s imperative that you proactively conduct any necessary maintenance to make sure it’s in peak condition well before the first snow hits. Also check your furnacerepair and boiler repair or any other require maintenance.

boiler-service.jpg

Maintain Your HVAC System

First of all, if you don’t do this already, you need to get into the habit of changing the air filters on your HVAC system regularly. It’s typically recommended that you change filters once a month, although the ideal periodicity depends on the specific system and how much you use it. You know best how often you circulate cold or warm air throughout your house, so if your consumption seems above average take extra care to stay on top of the filter rotation.

Another thing you can do to test if your system is working during this fall is using your thermostat to give your heating a ‘test run’ before the cold temperatures hit. A few quick tests to see if your system can rise to the temperature you set are a great idea to do as a preliminary evaluation of your HVAC system. If it takes too long, or cannot seem to reach the temperature you set, you should call a professional to address the inefficiencies before your system is needed on a daily basis.

Reduce Your Energy Bills

Keeping your HVAC system in good working order is one of many things you can do to reduce your energy bills. Prioritizing laundry items, sealing and repairing drafty areas, and turning off appliances when they’re not in use are some other useful tips for cutting down on utility costs. Just make sure you’re not like many consumers who buy into myths about energy that just won’t die.

One way to keep your energy costs down in winter is to acquire a programmable thermostat that allows you to switch your heating on and off in accordance with your lifestyle. For example, if you’re an early riser working nine to five, there’s no sense having the heating on at two in the afternoon. Similarly, if you work from home and enjoy sleeping in late, you can avoid turning your heat on until approximately one hour before you get out of bed.

If you have a furnace and want to reduce your energy bills during the cold season, think ahead and have a furnace inspection done in the late summer or fall. If a furnace isn’t properly maintained, it will consume more energy trying to perform its job, and you’ll soon see the results of this in your utility bill.

DIY Maintenance

There are a number of things you can do yourself with regards to HVAC maintenance. If you have a dual system, the system’s cooling functionality experiences a great deal of stress during the summer, so once the temperatures begin to drop you should conduct a maintenance check. Getting your air conditioning ready for the winter is one thing, but you also need to make sure it is free of dust and debris for the next year. Winter is actually a good time to evaluate repair for your air conditioning system if you have a separate heating system, because you won’t be requiring cold air during any potential down time.

Professional Maintenance

Although there are some valuable things you can do yourself to bolster system efficiency, there is other work that you would be best advised to leave to the professionals. First of all, if you’ve had your current system for a while and think it’s not running at full capacity despite your regular maintenance efforts, you may have to choose between getting your HVAC system repaired or replaced.

There are a few signs you can look out for to help guide your HVAC repair vs replacement decision. Consider how long you’ve been living in the house so that you can estimate the age of the system. If it’s ten years or older and consistently doesn’t respond well to small repairs or maintenance, replacement may be the best option. Additionally, if you notice huge energy bills no matter what you do or how economical you are with your system, this is a tell-tale sign that it has seen its best days and needs replaced.

Many homeowners deceive themselves into thinking that having the repairman out to their home regularly instead of having the system replaced with a new, modern model is a smart way to save money. Unfortunately, homeowners typically end up spending a lot more in the long run when putting off needed installation of a new HVAC system. Don’t forget, you’re not only spending money on regular repairs, but every energy bill you get in the mailbox is bigger because your system is no longer effective.

Things to remember when hiring an electrician

Electrical work is difficult and dangerous to discover alone. The slightest mistake can lead to a short circuit or a fire, so it is a good idea to hire an electrician like b&b heating and cooling even if it is the smallest jobs.

We checked in with our secondary salesman of the month, Jonathan Steed, and the first merchant to reach 500 positive reviews on our website, Vin Patel. How easy your job may seem, there are a few things that are important to consider when hiring an electrician. Here’s what it suggests:

Ask for proof

Ask to see the proof of experience and qualification that is required for most electrical work. The more titles they have, the better, but the proof is the key to controlling.

Check if there is an administrative

Make sure they are registered with a governing body. You can do this by simply going to the relevant websites and entering your name to see if they appear there. You can also check in qualified electrical person registered as b&b heating and air conditioning.

bbheatingandcoolingllc.com

Read previous relevant evaluations

Positively it is not enough in itself. You should check if they are relevant to the job you need. Read through the comments above to confirm that their electrical potential is well rated for jobs similar to yours. Also to check reliability and punctuality. Customers often leave detailed comments and feedback taking advantage of this!

Accept an offer

Before hiring, make sure that you agree to the appointment and not an approximate estimate. The appointment must contain the details of the job, the actual price and the payment schedule that describes a deposit or payment schedule. The schedule is particularly important because it avoids misunderstandings on the line.

Do not choose the cheapest option

When considering the various quotes of the electricians in the list, do not choose the cheapest one. Read the statement carefully to make sure you ultimately choose the best person for the job like suppose you are facing any funny noise from your boiler so you should read or ask about this issue first and then you should hire any professional for your boiler repair.

Finally, once your work has been completed, you will receive a certificate. If your electrician does not agree, then that is a big red flag and you should consider this again.

The importance of repairing and maintenance of air conditioning systems

There are many things that can go on any major device at any time and the air conditioning is no exception. During the heat of Amherst, OH, you want your air conditioning to function properly. This is because it can be very depressed to find a AC repair person when you go through uncomfortable heat wandering.

You can probably solve your air conditioning problems. However, it is required on a given rental of technical time conditioning. An air conditioning unit is quite an abstract machine and when it should be stopped and open, is not the best way to fix it yourself. So you should consult with the professionals in your area like b&b heating and cooling in Amherst, OH

It is advisable to put in an air conditioner trained and qualified to perform air conditioning repair. This is mainly due to Feron’s electric level determination or regulation factor that can only take a qualified person like b&b heating and air conditioning. Trying to do just the repairs can only lead to more complications and the contractor will have to pay more than you should have your air conditioning to run correctly.

If you’re from Amherst, Ohio and want to stay cool this summer, you need to find a reliable company that can take air conditioning in Ohio. You should look for an AC repair company that is reliable and reputable and is also authorized to operate in Ohio. You can get help from friends, colleagues, family, and you can arrange business inquiries where short reference.

If you have a good knowledge of the types of problems they can develop in their conditioning, it is easier to determine what repairs or services are required by air conditioning units. If a faulty air conditioner occurs, it will likely lose its ability to keep the room cool. This can also lead to greater energy costs and a lot of difficulties, especially in the heat of Ohio.

bbheatingandcoolingllc.com

Air conditioning units are usually built very well for the team to last. However, they still require regular repairs and it is best to have a good idea of ​​what’s wrong with the unit. It’s important nowadays and stay cool during the summer, as it is very important for their well-being.

When pumps are overlooking the air conditioning unit, the problem may be the drainage device. Ducts capacitor discharge can prevent, or drain pipe may not function properly. You can unlock the line itself, but if it fails, you should contact a b&b air conditioning as your specialized air conditioning team.

When part of the lack of air conditioning, it is advisable to contact a professional air conditioning. Sometimes air conditioning can not produce enough fresh air. It increases your energy and means that the coolant should be full. It usually ensures proper maintenance and maintenance of an air conditioning unit for long life. However, if there is a problem, it is advisable to consult an expert air conditioning professional.

Cost of boiler repair and system understanding

Most boilers repair and service should be able to continue working with maximum efficiency. The boilers are relatively good, but it is not always easy to fix. Hiring the right professionals for boiler repair ohio to provide a strong guarantee of their experience, it is important to keep your home comfortable.

How does the system work?

In general, a heating system comprises a hot water heating system boiler with water, a network of pipes to distribute water and radiators or underfloor heating different rooms. These controls include a combination meter allows you to control the temperature and pressure, and you have to know when or malfunction of the water needs of the boiler. Some systems provide an automatic pressure reducing valve of the water. A faulty boiler is very dangerous for your pipe line so you should do the boiler repair cleveland ohio or maintenance at right time quickly.

A typical system has an expansion tank to properly charged with air to prevent boiling. Newer systems tend to have expansion tank in the basement ceiling near the boiler; Also included are a purge valve to solve the water and breathing if necessary. Older systems sometimes have the expansion tank in the attic and contains a level indicator similar to that of a steam boiler.

boiler1-1500x430

Common system problems

Because they have few mechanical parts, working the water heating system is generally reliable for many years. The most common problem with expansion tank or a circulatory instead of the boiler. A hot water system can not generate heat or poor heat and may leak. This can be attributed to many problems of incorrect mineral deposits in a misfire pilot burners or water. Another common problem is that some of the radiators can not be heated, while the others or that your pipes can cause a ringing sound. Whatever your problem is please hire professional for residential boiler repair to fix it. When it comes to electrical system and water – they want to take any risk to safety.
repair cost factors

The best way to reduce costs, routine maintenance on your system. Most problems that arise in their “free” spending boiler meat. It is always less effort and less costly to organize the exchange of fuel. The chain may have 20 years or more and keep it in order, they are in a cold shower you have an emergency to fix your boiler. Some insurance companies offer a “boiler insurance” that can help reduce costs and maintenance costs. So find boiler repair near me whenever you need the professional services in the Ohio. Most boiler technician charged with the time and you can lose a day for the repairman.

Is your boiler making a funny noise? Do you suspect it’s not working to its full potential? Allow our skilled team to evaluate your system, repair whatever we can and make suggestions on how to achieve optimal usage.

When you need the best boiler repair or installation services in all Amherst and Lorain County, OH, give B&B Heating and Cooling a call at 440-988-2277. Don’t forget to ask about our 1 year warranty on repairs!

Why Duct Cleaning is Important

Air ducts and extraction points are the highest dirt and allergens in the home. They are easy to forget because they are not in the eye of other things that are often included in the daily chores of the home. According to b and b heating and air, for a clean and healthy home, it is important to clean the air channels regularly.

Prompts healthy air flow

HVAC systems only operate at their maximum capacity when air ducts are cleaned and maintained. A properly functioning ventilation system ensures that the atmosphere can be more comfortable. A flow of air also helps to build prevention of mold formation. This in turn reduces the level of contamination entering the housing through air ducts and ventilation ducts. Moreover b&b heating and cooling know everything preciously and can help you if you are interested.

Save HVAC channels from dirt

A busy home can produce up to 40 pounds of dust per year, including dandruff and allergens. These impurities are sucked inside the heating and cooling system, they are trapped in the channels. This ensures that the heating and cooling units work harder, and then reducing the life expectancy of the unit.

bbheatingandcoolingllc.com

Dirty channels extend pollutants

Over a period of time, impurities such as allergens, dust, mold or mildew build in the HVAC ducts due to suction system of b&b heating. When the unit is on, dirty air is blown through the house. In this way, make your home-dirtier channels dirty and full of contaminants. It can become so over loaded that they back up dirt and debris into your HVAC system,causing clogs and inhibiting the efficient operation of the system.

Reduce allergy symptoms

Keeping air ducts clean and free of dust, dirt and allergen exploration promotes a healthy breathing environment. Breathing air in the air is critical to the health and well-being of all residents of the home, especially for allergy sufferers. Clean air conduits events contribute to the reduction of upper respiratory problems in people with asthma or allergies, because the pollen and all other genes.

Make heating and cooling system better

One of the easiest ways to avoid unnecessary AC repair, is to hire a HVAC professional to carry out regular maintenance, including cleaning the channels in the b&b heating and airContact an HVAC professional for inCleveland AC maintenance and repair to ensure your family has access to safe and efficient air cooling and heating.